MadModder
The Shop => CNC => Topic started by: msimpson on July 22, 2017, 12:51:13 AM
-
I designed and built a while back for the DC engineering fair.
-
Well, nice aesthetic job of design. A good teaching tool.
In my shop, though it would look like hell a year later, even if I avoided placing it under the router, as would have been my preference. Metal, swarf, sawdust, plastic static, coolant, WD-40 would quickly diminish the art gallery look. I also like the RF shielding afforded by a metal case. But certainly an admirably executed project.
-
I can see the PC case modding influences in your work! Cool and interesting!
Eric
-
I have been hunting for some pics of various PC cases I have built with the CNC.
I will post them as I find them.
This is one I did about 8 years ago. It is a home theater PC. It (at the time) was connected to my projector and sound system. It only had a single button under the unit near the front to turn it on and off. Every thing else was done with Bluetooth and remotes.
-
Very nice looking case!
Eric