MadModder
Gallery, Projects and General => Project Logs => Topic started by: doubleboost on August 17, 2013, 05:32:25 AM
-
-
Ooohhhhhh, you spoil us with two videos in two days.
Kettle on :)
-
This is not boring at all, it is highly interresting - keep e'm coming! :thumbup:
In fact, this is a task that I am going to do in a while as I am trying to get a VDH for my C3/SX1L combination. I will use the GHT VDH as base and go from there.
This is how far I am at the moment.
(http://i577.photobucket.com/albums/ss219/H0n3/Tooling/C3-VDH/PEVDH-01.jpg)
So more videos please :drool:
/Peter
-
Doubleboost
Your Video's are an inspiration. I'm well on the way with my small dividing head.
Body is bored. Bearings are made. Spindle I completed today.
I'm now trying to get a 2mm slitting saw through it, preferably without blowing up the Mill Motor again !
Thai is the Dividing head from the workshop books.
-
Gret videos again John.
Any chance of a couple of pics/drawings of the tool bit in the boring bar. Looking for info on how to sharpen broken drills/mills etc. to use in a similar manner.
Cheers
Paul