MadModder
Home Base => Introductions => Topic started by: DICKEYBIRD on August 20, 2009, 08:51:41 PM
-
A quick hello to everyone in the forum! I've been lurking here a couple of weeks and ya'll (shut up Spellcheck, that's the way us'n's talk here in Tennessee) certainly are the sort of pals I like to hang with!
I recognize many of you from other forums and hope you'll accept me here as well.
Like another fellow that posted here recently, when I saw John (Mr. Bogstandard) was a member, I just had to join! :beer:
Milton Dickey
Collierville, TN
USA
-
DICKEYBIRD
Welcome to MadModder. I think that you will like what you find here. A lot of knowledge, a lot of variety and a lot of fun. There is also a good chance that you will catch :proj: as many before you have. Enyoy your stay an remember :mmr:
Cheers :beer:
Don
-
Thanks Don, I definitely have Projectitus; I just need to learn to the ways of the MadModder. Maybe I'll get more done that way.:)
-
Hi Milton,
Glad you have decided to join us over here as well, there is nothing like a varied diet. No two sites are the same, and this one is a little stranger than most, in that almost any project can be shown on here.
But unless you have a camera, you will get beaten with one of these :worthless:
at every opportunity.
Bogs
-
We just knew we should have hidden Bogs. All sorts of strange characters have been following him. :lol:
So welcome to the collective :borg: . Have fun and show us your projects. :thumbup:
Bernd
-
Thanks for the warm reception gentlemen. I have a few projects going on in various stages of confus...err, completion and I will definitely post up the pix when they're a bit farther along.
As luck would have it, I started a combination surface plate/buffer-polisher stand last weekend and just as I started remembering a bit of SMAW welding technique, I got 2 phone calls to do some work for CASH that'll stop that project cold for a bit.
I've been wanting to purchase an 8" machinist's level and a 2 1/2" R-8 flycutter from CDCO and the extra cash will allow me to go ahead & order them. John's flycutter sharpening thread I found here has me keen to add one to the toolchest.
-
Welcome to the clubhouse, pull up a chair and join in the lunacy :lol:
Like Bogs said :worthless: We wanna see pics!!
Tim
-
Welcome abqard the cube :borg: Milton
The rest of the Chaps have more or less used up all the smilies with the exception of this one :nrocks: and this one :ddb: and this one :headbang: and this one :wave:
And how about these :D :)
Just have fun and enjoy
Stew
-
Welcome Milton, :thumbup: nice to have you aboard.
CC
-
Hi Milton,
Welcome to the collective :borg: our little flying virtual cube in the interwebs!
Would likr to see some of the projects. Even the ones for cash can make interesting reading.
Eric
-
Welcome to the collective Milton!
Enjoy! :thumbup:
David D
-
Hey Milton :wave:
Welcome to the collective :borg:
A man with talents like yours is bound to have some interestingly mad things to share with us?
Good to see you here :thumbup:
Ralph.