MadModder

Gallery, Projects and General => Project Logs => Topic started by: John Rudd on January 01, 2016, 07:29:04 AM

Title: Webster engine-a mornings work
Post by: John Rudd on January 01, 2016, 07:29:04 AM

Machine up the latest part for my Webster build.....took all morning.!! :Doh:

The design calls for a 'bought in ' part.....I decided to roll my own....

I'll get some more fotos taken and put them up in here with this thread.....

Title: Re: Webster engine-a mornings work
Post by: raynerd on January 01, 2016, 07:47:08 AM

John, I built a Webster a good few years back, which part is it, can't remember buying anything but can't recognise the part.

Title: Re: Webster engine-a mornings work
Post by: John Rudd on January 01, 2016, 09:12:14 AM

Chris,
Its the shoulder bolt for the cam- exhaust valve rocker arm thingy.....the bit machine from some 1/4 sq bar that I managed to cock up...yesterday.....so tried something simpler :lol:....


Where can I get some spring steel from for the rocker? Any ideas......?

Title: Re: Webster engine-a mornings work
Post by: chipenter on January 01, 2016, 02:04:47 PM

I have used bailing straps they are pritty tough and blued allready cheep to .

Title: Re: Webster engine-a mornings work
Post by: raynerd on January 01, 2016, 09:16:54 PM

John, currently in bed (can't sleep hence 2am posting!) but I'll take a look tomorrow as I'm sure I moved away from the plans a little when it came to the rocker.

Chris