MadModder
The Shop => Our Shop => Topic started by: 1hand on January 14, 2011, 10:49:23 PM
-
My "shop" is in our furance room in our basement. It aint much, but its warm :thumbup:
(http://i706.photobucket.com/albums/ww62/mrazink/010-8.jpg)
(http://i706.photobucket.com/albums/ww62/mrazink/011-9.jpg)
(http://i706.photobucket.com/albums/ww62/mrazink/012-7.jpg)
(http://i706.photobucket.com/albums/ww62/mrazink/013-5.jpg)
(http://i706.photobucket.com/albums/ww62/mrazink/007-14.jpg)
(http://i706.photobucket.com/albums/ww62/mrazink/008-12.jpg)
(http://i706.photobucket.com/albums/ww62/mrazink/009-9.jpg)
(http://i706.photobucket.com/albums/ww62/mrazink/004-27.jpg)
(http://i706.photobucket.com/albums/ww62/mrazink/005-24.jpg)
(http://i706.photobucket.com/albums/ww62/mrazink/006-19.jpg)
-
Nicely set up and organized. Love the CNC machines. Nice selection of tools and stock.
Eric
-
Looks like a fun shop!!!
-
i like your shop very nice setup you got there gave me a couple ideas
-
Thanks Guys!
:mmr: :headbang:
Matt
-
very very nice shop you have there Matt :bow: :bow: :bow:
Rob
-
Nice shop, well planed and layed out.
Dave
-
No swarf in evidence. Looks photoshopped. :scratch:
Just kidding. :beer:
-
Mathew.
What a nice neat working environment you have created for yourself, I am a little on the neat side too, but I for one I have this thing when I am working in the shop on a project I tend to create a little disarray.
Again well done on the shop sir. God bless Anthony
-
Thanks guys for the Kind words. :thumbup:
Matt
-
:nrocks: hi well lade out brill
-
Yes, very nice. Question, what are the top surfaces of the counter tops made of and how do you keep them from getting stained?
-Kenneth
Thanks Ken,
They are 3/4" MDF on top on 2x4s. They will stain if not painted or sealed.
Your shop Rocks!!!
-
I am really crazy when it comes to light!!!! The area is about 10' x 16' , and I have a total of 19 "100 watt" smart bulbs. I hate shadows!
-
I sealed the pine table for my shaper with 90 weight gear oil :D I figured it would be hard to get oil stains on it that way.
Nice shop Matt!!! I love the light also. lots of it in mine.
-
What a well-organized and planned shop you have! I am envious!
Nelson
-
Nicely layed out shop. Is that a 6" HF buffer I see in one of the photo's? I just bought one a few weeks back and have really put some use on it. First day it ran constant for 4 hours. I am using two buffs on each side.
-
Nicely layed out shop. Is that a 6" HF buffer I see in one of the photo's? I just bought one a few weeks back and have really put some use on it. First day it ran constant for 4 hours. I am using two buffs on each side.
Thanks Bob, The one by my soldering bricks is a $19.99 black fri sale at Ace hardware my wife got me while I was at deer camp. :D
-
Don't tell my wife, but I expanded out into the garage today. My furance room/shop is full and some more room was needed for the new welding and blasting dept. I've added.
(http://i706.photobucket.com/albums/ww62/mrazink/001-68.jpg)
(http://i706.photobucket.com/albums/ww62/mrazink/002-54.jpg)
(http://i706.photobucket.com/albums/ww62/mrazink/003-45.jpg)
(http://i706.photobucket.com/albums/ww62/mrazink/004-39.jpg)
Matt
-
Looking good Matt!
I won't tell.
Eric
-
Matt,
That's a nice sturdy looking welding table.
I won't tell either
:beer:
DaveH
-
Nice workshop Matt, well organised and well appointed.
One question: How do you stop your lathe and milling machine from distributing swarf all over the workshop? It is the bane of my life (well, one of them).
Jim
-
Nice workshop :thumbup: :thumbup: