MadModder

Gallery, Projects and General => Member Videos => Topic started by: celsoari on February 17, 2020, 03:49:26 PM

Title: camlock back plate
Post by: celsoari on February 17, 2020, 03:49:26 PM
my lathe has a camlock type, in this video I demonstrate how I built a camlock back plate:

o meu torno tem um encaixe do tipo camlock, neste video demonstro como eu construi uma flange camlock para uma placa autocentrante de 4 castanhas:



cheers
Celso Ari
Title: Re: camlock back plate
Post by: philf on February 17, 2020, 05:35:26 PM
Very nice Celso Ari!
Title: Re: camlock back plate
Post by: RotarySMP on February 18, 2020, 02:39:55 AM
Good work. Thanks for sharing it.
Title: Re: camlock back plate
Post by: GordonL on February 18, 2020, 08:08:52 AM
Looks good. I do question the wisdom of wearing sandals in the shop. Some of those chips are hot and sharp.
Title: Re: camlock back plate
Post by: celsoari on February 18, 2020, 12:45:25 PM
Very nice Celso Ari!

Good work. Thanks for sharing it.

thanks Bros...greetings from Brazil
Celso Ari