MadModder

Gallery, Projects and General => Neat Stuff => Topic started by: NormanV on March 17, 2018, 12:24:25 PM

Title: Wooden Clock
Post by: NormanV on March 17, 2018, 12:24:25 PM

This is quite clever. :jaw:

Title: Re: Wooden Clock
Post by: krv3000 on March 17, 2018, 01:15:31 PM

 brill

Title: Re: Wooden Clock
Post by: mexican jon on March 17, 2018, 06:22:52 PM

That's Bloody Clever  :bugeye:

Title: Re: Wooden Clock
Post by: SwarfnStuff on March 18, 2018, 12:32:55 AM

Sure Hope he got A+++++ for that.
John B

Title: Re: Wooden Clock
Post by: nrml on March 21, 2018, 06:30:01 PM

What an astonishing piece of work :clap:. I am amazed that he made it all using a band saw  :bugeye:. That kid must have the most amazing determination and willpower to be able to complete such a project without a CNC router. As to his creativity; his work says it all :bow:.

Title: Re: Wooden Clock
Post by: Meldonmech on March 22, 2018, 07:48:11 AM

Hi Norman

      What a novel and interesting clock. Do you fancy making one using your own aluminium castings?
                   
                                              Cheers David

Title: Re: Wooden Clock
Post by: NormanV on March 22, 2018, 09:19:28 AM

The castings would be relatively simple, it is the precision required in the machining that scares me!

Title: Re: Wooden Clock
Post by: awemawson on March 22, 2018, 09:44:55 AM

Yes an awful lot of hand fettling would be needed I suspect (no dis-respect to your castings Norman, it would be the same for any castings unless they were die cast or lost wax)

Title: Re: Wooden Clock
Post by: NormanV on March 22, 2018, 12:22:56 PM

Hand fettling? Angle grinding more like? :lol:

Title: Re: Wooden Clock
Post by: RussellT on March 22, 2018, 12:54:19 PM

Well, you could send a message and ask if you could use the parts as patterns. :lol:

Russell