MadModder
The Breakroom => Resources => Topic started by: bogstandard on March 25, 2009, 04:31:15 AM
-
Here is another site that you might like to have a poke around if you are newish to machining, or even if you are experienced, it gives some basic insights into machining and a few very good tips.
http://www.nmri.go.jp/eng/khirata/metalwork/index_e.html
It is worth spending a little time having an easy read thru the whole lot.
John
-
nice link much appreciated :thumbup:
Lots of great info (http://i27.photobucket.com/albums/c176/j450n_/idhitit.gif)
-
Nice link John! Helpful indeed.
Eric
-
(http://i27.photobucket.com/albums/c176/j450n_/idhitit.gif)
Thanks Ja2on... another smiley to add!
Eric