MadModder
Gallery, Projects and General => The Design Shop => Topic started by: sbwhart on January 26, 2013, 04:25:51 AM
-
Just finished drawing up a simple mill engine, I've tried to design it so that it can be made using a lathe and a drill, no milling is required.
I've also tried to make it so that the cylinder can be used in other engine configurations.
I wont be making this engine for quite some time as I'm going to be concentrating on other things but if any one wants a PDF copy of the drawing just send me a PM with yur email adress and I'll send them a copy.
Attached is the assembly drawing
Stew
-
Thanks Stew! :beer:
I reckon I could manage to build one of those, eventually....... :thumbup:
Good luck, with your, "other things". :)
David D
-
I'd love to build one too...pm sent.
Thanks Stew...