MadModder
Gallery, Projects and General => Project Logs => Topic started by: russ57 on June 25, 2012, 12:23:56 AM
-
so, i've just order a DRO with 3 scales from the DRO store, for my 6x26 'top tech DM15 mill. I need to tell them what size scales i want. How/where do i measure?
General feeling i get is that in front of the bed is best for the X scale, to not lose Y travel. Any contrary opinions?
any other suggestions?
thanks
russ (oz)
-
Hello,Russ.
I guess I own a similar mill and went with Allendale for my glass scales.
I chose
GS500-120 Slim Glass Scale - 120mm Reading Length
GS500-170 Slim Glass Scale - 170mm Reading Length
GS500-370 Slim Glass Scale - 370mm Reading Length
Ordered matching protective covers as well.
More or less it has been an easy installation,even for a plonker like me.
(http://up.picr.de/10955992ks.jpg)
Z
(http://up.picr.de/10955993pa.jpg)
X
(http://up.picr.de/10955994im.jpg)
Y
I hope the pics help.
Cheers,Ralph
-
Sure does Ralph. Looks like you put the z_ on the quill? I almost always use the knee, I thought I might put a caliper on the quill eventually. I've also asked the suppplier if has a recommendation.
-Russ
-
I found this site Handy for ideas
http://mtechdro.blogspot.co.uk/2007/08/faq-what-scale-length-will-suit-my.html
Peter
-
OK, I've ordered 370 for x and z(w), and 170 for y
next step, taking a drill to my pristine mill....
-
update: at Scotts (The DRO store) i've changed the X scale to 420, to make installation a little easier.