MadModder
Gallery, Projects and General => Project Logs => Topic started by: krv3000 on May 11, 2021, 02:56:52 PM
-
Hi all hope you all are keeping well right john IE doubleboost has got a new project its a Stuart turner steam engine a large one i have part of it its the oil pump its in bit of a bad state so hear are sum pics of wat i have dune so far
-
as you can see its well rusty i removed the brass bits then put the mane part in the oven to get hot then lifted it out and let it cool to help remove the bolts right more pics
-
its coming on nicely tere Bob, I'm sure it will be as good as new when you have done. hope you are keeping well. :clap: :clap:
-
I saw that last night it needs a good soak in some citric very nice project though I’m looking forward to it.
-
Yes my first reaction was to reach for the citric acid crystals!
Nice work Bob
-
Nice work Bob,
I watched John's video on the engine yesterday, First thoughts were he'd bought 'a pig in a poke'....judging by the amount of corrosion...
This doesn't seem to have fazed him...but it will be nice to see the refurbished engine when its all done...
Looking forward to the next instalment.. :thumbup:
-
Watched the vid last night, waiting for the next instalment.
John
-
Fine work Bob, looking good!
Phil
-
hi did a bit more I had to cut out the cam that works the rocker that works the pump i made a new shaft for the cam to fit on to I have to make a new cam made a new spring for the pump sos no pics but put the mane body of the oil pump in the acid bath at work and it came out nice then panted the inside right pics
-
Great recovery job there Bob, :bow:
I'm sure John will be pleased... :thumbup:
-
hi all last bit i had to gestamate a lot on the cam as there was not a lot left of it right pics
-
Nice work!