MadModder
Gallery, Projects and General => Gallery => Topic started by: PJW on June 25, 2015, 06:04:02 PM
-
I have to make some supports for an engine I am building, they need to be all the same length so I need a backstop for my lathe,
has anyone any ideas please,
Peter
-
A/ turn up some soft jaws with a step
Or
B/ expanding plug in outer (far from chuck) end of the spindle with a threaded rod screwed into it with a locking nut.
-
Depends on the lathe spindle how you do it.
Some here:
http://www.homemodelenginemachinist.com/showthread.php?t=18296
Dave
-
Hi Peter.
I made a mini lathe stop. From the come in handy, box....... http://madmodder.net/index.php/topic,7643.msg83784.html#msg83784
David D
-
Hi Peter.
I made a mini lathe stop. From the come in handy, box....... http://madmodder.net/index.php/topic,7643.msg83784.html#msg83784
David D
A great thread, David which will help me a lot in setting up my new lathe. :clap: :beer:
-
thank you for the ideas, I will get on it asap!
Peter