MadModder

The Shop => Tools => Topic started by: 75Plus on November 08, 2010, 03:09:56 PM

Title: Anyone using Controx Endmills?
Post by: 75Plus on November 08, 2010, 03:09:56 PM

I ran across an odd size (27/32") Controx HSS/Cobalt roughing/finishing endmill at an unbelievable price of $17.95. It just happened that I had a need for just that size. The quality is outstanding. I have compared it to several of the major US brands and it beats them all for finish and durability. Going on that experience I picked up a smaller sized one and found the same quality.

I was just curious whether the other members have had similar experience with that brand.

Joe

BTW: This is German made.

Title: Re: Anyone using Controx Endmills?
Post by: Xldevil on November 08, 2010, 10:58:03 PM

Hello.
I don´t know their quality,never used one.But I can tell where this cutters came from:
http://www.neuhaeuser-controx.de/nextshopcms/show.asp?lang=en&e1=-1
Ralph