MadModder
Gallery, Projects and General => Member Videos => Topic started by: doubleboost on January 15, 2014, 07:11:13 PM
-
John
-
Looks like a nice substantial unit there john. Wire feed looks decent too, usually the biggest problem with the smaller hobby units.
Looking forward to seeing it in use.
-
-
Hi there, John,
I can't read Reply #2 - is it that misplaced square bracket again?
-
Very nice john. Been there and dropped a spool before and had the end slip out my fingers. Your right 'bŁ&@cks is the right word :)
-
well dun john do you want a flow meter for it
-
Hi
Bob
Just put the flow meter on that you gave me :D :D
John
-
-
Got a good laugh at the end of this one.
-
John just never ceases to amaze me..... :
But his sense of humour is just inimitable :lol:
-
-
well dun you will be making a bote for that engine to go in next
-
Hi John , I cant wait to see this baby get cranked right up :ddb: its getting nice welds in that latest vid on the half setting I bet it will melt in lovely on full power :drool:, my 165 amp Murex is not as good at thicker stuff as this welder was on this vid. I cant complain as its been faultless for a good 20 odd years and just does the job with no hitches in general.
Cheers Mick.
-