MadModder
Home Base => Introductions => Topic started by: Witness on January 05, 2015, 09:03:23 AM
-
Hello just to introduce myself, I'm coming up to retirement plasterer by trade(I'm glad thats over).
Well I've always been interested in machining so I bought myself an old Myford ML10 which needs a bit of work and a small chinese lathe I'm using at the moment. The Myford is working but all the Feed/Leadscrews are worn and need replacing so no thread work is possible on it at the moment. I hope to buy a mill in the future but only a dream at the moment. I came accross this site through youtube so I hope to pick your brains and learn all the tricks from you. Rob
-
Welcome aboard Rob, where in the UK are you ? Excuse my assumption YOU are in the UK.
-
Rob, hi.
Welcome. We seem to spend more time fixing or modifying our machines than actually making things with them, so you will be in good company.
Dave.
-
Hi Rob :wave:
Welcome to the collective :borg:
Eric
-
Hi Rob, welcome!! :wave: :beer:
-
hi and welcume
-
Hi Rob, welcome to the forum, lots going on here as a rule , plenty people willing to help and give advice. Hope to see you doing some posts as time goes on.
Cheers Mick.
-
Welcome Rob
Jim
-
Thanks for the welcome messages :thumbup: I've filled my profile in now and Joules I'm from south Wales
-
Hi Rob
Welcome to MadModder, I have had a ML10 for a number of years. Should you need any advice please ask.
Cheers David
-
Welcome to the funhouse Rob... :) you'll enjoy
George.
-
Hi Rob. :wave:
Welcome to the Collective! :borg:
You've come to the right place. Lots of people here, with lots of answers. Probably, all different! :thumbup:
Looking forward to seeing your work, and sharing your adventures. :D
David D