MadModder
The Craftmans Shop => Model Engineering => Topic started by: tom osselton on November 18, 2018, 01:40:33 PM
-
A fellow on another site I go to posted this so I thought I’d pass it on just a little light reading!
https://archive.org/details/ModelEngineerVol073No1807wIndex/page/n19?q=model+engineer
-
Great Tom, thanks for passing that on, just had a browse the a few issues. I never tire of reading the old ones. my own collection starts in 1950 so I have plenty of reading to get up to where mine start. :thumbup: :clap:
regards John
-
brill
-
I have this book in hard cover. Always found it interesting. Ingenious Mechanisms (http://www.opensourcemachinetools.org/archive-manuals/Ingenious_Mechanisms_Vol.1_Jones_1930.pdf)
-
Thanks guys.
I picked up the ME link elsewhere but its is always useful to make sure everyone gets the opportunity :thumbup:
To add to George's link: there are four volumes in that set of the Ingenious Mechanisms books, you can down load each by just incrementing the volume number in the link. I have the earlier 3 volume set in hard copy, now I have the later four volume set to read :beer:
Jo