MadModder
The Shop => Metal Stuff => Topic started by: ksor on March 29, 2012, 03:34:31 PM
-
I got a step further towards my first casting - look here:
http://kelds.weebly.com/form--og-sandbord.html (http://kelds.weebly.com/form--og-sandbord.html)
and let Google do the translation for you -set it up once and for all !
-
:clap: :clap: :clap: nice job Ksor :thumbup:
Just one thing you will need a bead around the inside of the moulding flasks to stop the sand moving :thumbup:
Do you have a project in mined that needs castings ?
Rob
-
Classically, you should use green or oil sand but there are lots of substitutes. One is mixing it with horse dung. Another is adding cement whilst your dentist will use Paris Plaster after making wax impressions.
I used something called Nottingham Green Sand and made the impressions from polystyrene whilst my wife used the lost wax process.
Probably, the two old books from a model engineer B. Terry Aspin will answer most of your needs. For those of an older generation will know him in Model Engineer as a cartoonist called 'Chuck'
-
:clap: :clap: :clap: nice job Ksor :thumbup:
Just one thing you will need a bead around the inside of the moulding flasks to stop the sand moving :thumbup:
Do you have a project in mined that needs castings ?
Rob
No, I have no projects in mind right now - of cause I have to melt all my scrap into bars - but nothing else ... don't tell anybody... I have 12-14 projects going right now ... I have to finish some of them first :med:
Yes, maybe you'r right about the bead on the inside ... it can be glued on now I think.
>> Fergus:
I got some green sand from a molding company in a nearby city - they scrap 10-20 tons of sand every day - so I got 25kg ready mix and 25kg to make some new sand with extra clay and coul.
I think this method best fits my way of "mold-thinking" - I think it looks as a "safe path" ... other methods looks more random to me .
-
As for melting down into bars, we simply poured the stuff into old angle iron to set.
The biggest worry was old Volkswagen bits that were magnesium alloy. :lol:
-
As for melting down into bars, we simply poured the stuff into old angle iron to set.
The biggest worry was old Volkswagen bits that were magnesium alloy. :lol:
I made some molds for bars out of some scrap U-iron - look here:
http://kelds.weebly.com/afsluttede1.html (http://kelds.weebly.com/afsluttede1.html)
And let Google do the translation for you !
I don't think I have any of that VW-alu ... oh, yeah, I HAVE ... my car ... but I'm not gonna melt it yet ! :loco: