MadModder

The Shop => Metal Stuff => Topic started by: doubleboost on April 14, 2013, 05:39:34 PM

Title: Bobs Cylinder Part Three
Post by: doubleboost on April 14, 2013, 05:39:34 PM

Sorry lads more video

Title: Re: Bobs Cylinder Part Three
Post by: micktoon on April 14, 2013, 06:14:09 PM

  An all time classic , 'the burning brush'  :lol: :lol: :clap: :clap: .......................... It was like the Chuckle Brothers  ......... 'you to me ' ...'me to you' , I am sure I have seen that other chap somewhere before too, the fire monitor  :D  ................ still having a chuckle here now  :clap: :clap:
   But still a good infomation video of the topic too  :bow: :bow:

  Cheers Mick

Title: Re: Bobs Cylinder Part Three
Post by: krv3000 on April 14, 2013, 06:38:36 PM

hi chears john and rob  :proj:

Title: Re: Bobs Cylinder Part Three
Post by: Brass_Machine on April 14, 2013, 11:27:29 PM

Nice job guys. That casting looks nice.

Eric

Title: Re: Bobs Cylinder Part Three
Post by: Meldonmech on April 16, 2013, 04:23:25 AM

Hi John,
              Very interesting casting video, there is always something new to learn, havn't  done any brass casting, but now I've relined my furnace with 1600c  refractory I'm ready to go. Couple of great castings, and nice bit of exitement with the brush.

                                                                                               Cheers  David

Title: Re: Bobs Cylinder Part Three
Post by: Rob.Wilson on April 16, 2013, 10:47:33 AM

I need a hair cut  :palm:


Rob

Title: Re: Bobs Cylinder Part Three
Post by: Stilldrillin on April 16, 2013, 01:08:36 PM

Nicely shown lads!  :clap: :clap:

Stillgrinnin.  :lol:

Title: Re: Bobs Cylinder Part Three
Post by: doubleboost on April 16, 2013, 05:03:22 PM

Quote from: RobWilson on April 16, 2013, 10:47:33 AM

I need a hair cut  :palm:


Rob

I need a hair transplant :bugeye: :bugeye: :bugeye: :bugeye: :bugeye:
I was ok till I met you  :doh: :doh: :doh: :doh: :doh: :doh:
John

Title: Re: Bobs Cylinder Part Three
Post by: jb3cx on April 16, 2013, 05:31:18 PM

Hi John,& Rob,fantastic video, :bow:im  sure a lot of the guys watching this will learn a lot from your videos ,as you talk it through step by step,from start to the finish,i might not be much cop at the casting malarky.but at least i know now how to set the brush on fire,and
swear better than i did before i watched this,so i have learnt something,i always thought i was thick,well thats what our lass says. :)
see  you later

peter.