MadModder
Gallery, Projects and General => Gallery => Topic started by: jim on September 07, 2009, 12:44:59 PM
-
not sure if this is in the correct place :scratch:
this is my bigger milltable for my mill head (X1) on my SIEG C4
its 10" x 10" and 16 mm thick ally plate, more than doubles the working area.
i've gone from spending more time trying clamp something, to loads of space!!! :clap:
even though this is a bit small (compared to the new mill, having power feed in X and Y is worth having
(http://i58.photobucket.com/albums/g270/jimmyocharlie/DSC00041.jpg)