MadModder

The Breakroom => The Water Cooler => Topic started by: awemawson on June 27, 2015, 11:35:59 AM

Title: Precision Engineering with Sledge Hammer !!!
Post by: awemawson on June 27, 2015, 11:35:59 AM

Forget grinding. Forget scraping, no need for all that messy bluing ....


...... what you need is a SLEDGE HAMMER  :lol:

I found this searching Youtube for examples of my JCB 803 - this is a slightly later 802 model that they are wrecking - they don't ever seem to consider that the slew ring gear may be warped as well as it's seat  :bugeye:

Title: Re: Precision Engineering with Sledge Hammer !!!
Post by: lordedmond on June 27, 2015, 11:48:53 AM

I will nod my head and you hit it springs yo mind


At least he marked it with chalk were to hit but he did not calibrate the hammer looks like a 14 pounder


 :doh:

Stuart

Title: Re: Precision Engineering with Sledge Hammer !!!
Post by: RobWilson on June 27, 2015, 11:57:08 AM

 :Doh: WTF !        found the ABBA sound track to be soothing  :med:


Rob

Title: Re: Precision Engineering with Sledge Hammer !!!
Post by: dawesy on June 29, 2015, 04:42:25 AM

Just off to level the ways on the churchill. Be right back :D
Glad it wasn't just me that thought the ring gear may be warped.