MadModder

The Breakroom => Resources => Topic started by: Mjay on January 11, 2009, 11:56:45 AM

Title: A couple more links
Post by: Mjay on January 11, 2009, 11:56:45 AM

MIT tech tv has some good instructional video

http://techtv.mit.edu/videos?q=machining

Soceity of manufacturing has 2 different video's each month for free.

http://www.sme.org/cgi-bin/get-item.pl?DV03PUB3&2&SME

Title: Re: A couple more links
Post by: Darren on January 12, 2009, 11:41:20 AM

This thread deserved a bump, I've been watching vids from the first link for two days now and they are VERY informative and well presented.

If you missed it, have a look......Thanks Mjay

Title: Re: A couple more links
Post by: Mjay on January 13, 2009, 10:15:39 AM

Glad you like the links. The first is very good, and the other is a bit dry at the start, but gets better further in.
I was googling machining sites and found them, and that is also how I found this site. :beer:

Title: Re: A couple more links
Post by: Brass_Machine on January 13, 2009, 10:52:04 AM

Quote from: Mjay on January 13, 2009, 10:15:39 AM

Glad you like the links. The first is very good, and the other is a bit dry at the start, but gets better further in.
I was googling machining sites and found them, and that is also how I found this site. :beer:

Really? You found us from googling? Very cool. I check now and again to see how we are doing on google... nice to see we are coming up.

Eric

Title: Re: A couple more links
Post by: Mustang on January 13, 2009, 11:26:56 AM

You can download the MIT videos and then view them at your leasure. Between 2a.m. and 7a.m. I have unlimited download bandwidth so downloaded all nine of the videos and have been perusing them at my leisure. They certainly worth keeping in you machinery library. :D