MadModder
The Shop => Tools => Topic started by: mhh on April 21, 2011, 04:28:22 PM
-
Time to take a look at the old saw again!
(http://i799.photobucket.com/albums/yy272/mhh_photo/04-21-2011/sav.jpg)
It was running on motoroil and I wanted to run on coolant instead so it got cleaned up.
(http://i799.photobucket.com/albums/yy272/mhh_photo/04-21-2011/sav2.jpg)
The shiny cylinder was made a few years ago, the old one was attacked by rust and was useless to say the least after the new one was made everything worked much better.
(http://i799.photobucket.com/albums/yy272/mhh_photo/04-21-2011/sav3.jpg)
The arm.
(http://i799.photobucket.com/albums/yy272/mhh_photo/04-21-2011/sav4.jpg)
Also a new switchbox was needed, the old one missed the lid.
(http://i799.photobucket.com/albums/yy272/mhh_photo/04-21-2011/sav5.jpg)
Cutting again! works much better, before it had a tendency to chip a few teeth fairly quick because of the oil pressure being higher than it should be
(http://i799.photobucket.com/albums/yy272/mhh_photo/04-21-2011/sav6.jpg)
Using oil caused a big mess, and it was pure hell to weld! :D
-
Nice fix there! Good to see old machinery still going strong! :)