MadModder
Gallery, Projects and General => Neat Stuff => Topic started by: NormanV on March 17, 2018, 12:24:25 PM
-
This is quite clever. :jaw:
-
brill
-
That's Bloody Clever :bugeye:
-
Sure Hope he got A+++++ for that.
John B
-
What an astonishing piece of work :clap:. I am amazed that he made it all using a band saw :bugeye:. That kid must have the most amazing determination and willpower to be able to complete such a project without a CNC router. As to his creativity; his work says it all :bow:.
-
Hi Norman
What a novel and interesting clock. Do you fancy making one using your own aluminium castings?
Cheers David
-
The castings would be relatively simple, it is the precision required in the machining that scares me!
-
Yes an awful lot of hand fettling would be needed I suspect (no dis-respect to your castings Norman, it would be the same for any castings unless they were die cast or lost wax)
-
Hand fettling? Angle grinding more like? :lol:
-
Well, you could send a message and ask if you could use the parts as patterns. :lol:
Russell