MadModder

Gallery, Projects and General => Gallery => Topic started by: swhite on June 06, 2010, 06:47:06 PM

Title: Pimped out mini lathe
Post by: swhite on June 06, 2010, 06:47:06 PM

Here is my Taig lathe with some mods I did on it, I built and attached X and Y dials, depth dial on the tail stock and a dial on the head stock for the 4 jaw chuck.

Title: Re: Pimped out mini lathe
Post by: cidrontmg on June 06, 2010, 08:55:16 PM

Wow. I´m often having serious trouble just fumbling with one clock in a somewhat bigger lathe (Myford S7).  :clap:

Title: Re: Pimped out mini lathe
Post by: swhite on June 06, 2010, 09:22:24 PM

You would be surprised at how accurate you can be on a small scale with these little jewels..

Title: Re: Pimped out mini lathe
Post by: Dean W on June 07, 2010, 12:21:35 AM

Hi Steve!

I'd recognize that diamond plate on the head and tail anywhere.
 :wave:

Dean

Title: Re: Pimped out mini lathe
Post by: swhite on June 07, 2010, 02:15:17 AM

Hi Dean,
I would know that little engine too, any new projects?