MadModder
The Shop => Metal Stuff => Topic started by: Gadget on May 31, 2013, 06:18:34 PM
-
I cast this today. The veteran's marker for Dad's grave was broken and unusable. I used the round part as a pattern and cut the pattern for the name plate with the CNC table. I'll drill a hole in the top for a flag and a threaded hole in the bottom for a ground stake. That should hold up better than the old one.
-
Nice job :bow: :bow: and a more than worthy thing to do , I am sure your dad will be looking down proud of that knowing you have cast it yourself, WELL DONE :thumbup:
Cheers Mick
-
Nice job
What metal is it cast in
John
-
I cast it in aluminum.
-
:clap: :clap: :clap: Nicely done Gadget :thumbup:
Rob