MadModder
The Shop => Our Shop => Topic started by: Jim Dobson on June 01, 2019, 10:17:55 PM
-
I updated the swarf collector to the MKII version today on my Sieg C6 (Sieg C6, Grizzly G0516, Hare & Forbes AL-60, Axminster Metal Lathe). Some guys like these and some guys don't, after using one for years I wouldn't be without one now. Perfect for keeping all the swarf off your lathe ways and off you and your feet whist machining wearing thongs!
-
I'm going to take a wild guess that in Australia, "Thongs" aren't the same things as they are in the UK.... either that, or I'm going to need to go and bleach my eyes now. :lol:
-
LOL Ade's hold off on the bleach :)
But get the Occupational Health & Safety Squad :)
Beach footwear, those cheap rubber things. I think some countries call them flip flops.
-
I use 2mm nylon to stop the coolant running off the end of the lathe between the vees , and it flexes when the chuck jaws hit them .
-
I keep promising to make one of these every time I crap myself when I get the flash over from fine (usually brass) swarf getting into the motor and on the com, and then I swiftly forget again until the next flash :doh: your tray looks the part :thumbup: