MadModder
The Breakroom => The Water Cooler => Topic started by: Baldrocker on November 14, 2009, 06:46:35 AM
-
Guess who just spent 20 mins trying to tap a 3/8 acme with a 10mm roughing mill :bang:
BR
-
But did it work ?
-
It gets to all of us at some time or other.
Now try the tap as a milling cutter.
Bogs
-
Guess who just spent 20 mins trying to tap a 3/8 acme with a 10mm roughing mill :bang:
BR
:lol: :lol: :lol:
-
Guess who just spent 20 mins trying to tap a 3/8 acme with a 10mm roughing mill :bang:
BR
Well...... What`s wrong with that? :scratch:
It`s an easy enough mistake to make! :thumbup:
David D
-
Guess who just spent 20 mins trying to tap a 3/8 acme with a 10mm roughing mill :bang:
BR
Baldrocker
You are either going to have to learn to turn the lights on when your in the shop or brush up on your Braille skills. :lol: :lol: :lol:
Cheers :beer:
Don
-
Did you not find it odd that there was no square on the end? :doh: :doh:
Joe
-
Know the feeling, My worst time is doing the grocery shopping. Since I only need them for real close up reading. It is a Royal pain to wear them as anything a little distance away becomes fuzzy! The have recently started to change the labels. Style colors printing,and decided that smaller printing is better. Combine that with the marketing genius that thinks moving the product from were it been for years. Down the shelf two feet, thinking it will get you buy more if you have to hunt for it :doh: :bang: it is very frustrating. And in the shop the poorly labeled or etched drills and taps can be a very big PIA. :scratch: