MadModder

Gallery, Projects and General => Gallery => Topic started by: mechman48 on July 19, 2011, 11:46:21 AM

Title: Gallery
Post by: mechman48 on July 19, 2011, 11:46:21 AM

Hi All :wave:
Have been away for a while working (Yup I have a job in this day & age) & have tried to keep up to date with this forum.I have been interested in getting involved with ME for the past 10 yrs but only now beginning to have a bit more time to get involved..nearing retirement age!
I initially bought a chinese combo machine to start with & initially started making some bits 'n' pieces..as we all know when you have machinery you make more stuff to go with it rather than start on projects per se, anyway I dug out some of the bits I made over the years & took some photos hopefully to post in this forum.
I managed to set up a Photobucket account & also managed to upload about 70 photos (not bad for a silver surfer), I did find out that when I tried to edit some my thumbs & fingers quite often collided with each other so my spelling & grammar left a lot to be desired.

Whilst digging out the bit 'n' pieces I came across stuff that I'd forgotten I'd made/started & not finished, anyhow I have attempted to post the first photos for your digestion/cogitation so here goes;

(http://i1136.photobucket.com/albums/n490/mechman48/001DSC00009.jpg)

My chinese combo

(http://i1136.photobucket.com/albums/n490/mechman48/003DSC00011.jpg)

My main storage facility

(http://i1136.photobucket.com/albums/n490/mechman48/004DSC00654.jpg)

I fabricated this fold away bench to allow me to still put the car away when I am away at work (& under the instructions of SWMBO)

(http://i1136.photobucket.com/albums/n490/mechman48/007DSC00657.jpg)

(http://i1136.photobucket.com/albums/n490/mechman48/008DSC00658.jpg)

(http://i1136.photobucket.com/albums/n490/mechman48/100_2519.jpg)

Fabricated travelling steady for small diameter material

The following are of a small dividing attachment I fabricated initially to practice my fabrication & machining skills

(http://i1136.photobucket.com/albums/n490/mechman48/DSC00604.jpg)

(http://i1136.photobucket.com/albums/n490/mechman48/DSC00605.jpg)

I will post more when I see that the images are visible by readers..please let me know if you can see them ok. I'll say bfn & catch up later
Cheers & happy maching
George
Teesside

Title: Re: Gallery
Post by: DaveH on July 19, 2011, 11:52:24 AM

George,

I can see them fine :clap: Nicely photographed as well :clap:

You have got some nice stuff there.

Seems your fabrication and machining skills are very good.
 :beer:
DaveH

Title: Re: Gallery
Post by: Rob.Wilson on July 19, 2011, 12:28:12 PM

Hi and Welcome George  :wave:


Very tidy set up you have there  :clap: :clap: Its always good to see shop made tooling  :med:  :dremel: keep the photos coming  :thumbup:


Rob   

Title: Re: Gallery
Post by: ilia-45 on July 19, 2011, 02:41:41 PM

Very nice place you have, rather small but practical :dremel: :thumbup: