MadModder
Gallery, Projects and General => Neat Stuff => Topic started by: dsquire on August 20, 2009, 01:14:46 AM
-
Hi All
While checking out another site tonight while the board was down I found a mini v8 engine.
Here is a link to the site.
http://www.weberprecision.com/
Cheers :beer:
Don
-
Nice engine, I must go out and get me one of those four axis machining centres, plus a new house for me to fit it in, Oh! and I won't forget to pick up a new Bentley while I'm spending my loose change.
A very nice job by the way, and if he went into to production, that would be the way to go, but unfortunately, I wouldn't class it as home shop machining.
But he is only playing at it. Conley has been producing these sorts of engines for a few years now, and is classed as one of the best.
http://www.conleyprecision.com/
Bogs
-
Better buy a trailer for the Bently so you can bring the machine home Bogs! :lol:
-
I wouldn't class it as home shop machining.
But he is only playing at it.
Bogs
Isn't that where most of us are, just at different levels maybe......
-
The VF-1 mill is the same as the ones at the school I attend at night. Notice the hole in the ceiling to accomodate the spindle :coffee: It still takes skill to program and operate these machines, just different skills than manual work.
-
Independently wealthy perhaps? Maybe somebody left him an inheritance.
Bernd
-
A new VF-1 costs $46K, and I have seen used ones sell for as little as $10K. The lathe retails for about $25K. Certainly expensive, but there are lots of people who spend more on their hobbies. Of course the tooling isn't cheap either.
-
That is my dream shop, I love that TL1 lathe. And that lil engine is so sweet.