MadModder

Gallery, Projects and General => Gallery => Topic started by: kvom on February 02, 2011, 07:41:02 PM

Title: Instrument Cluster
Post by: kvom on February 02, 2011, 07:41:02 PM

My buddy is building up an older CJ7 as an offroad/rock crawler, replacing the older 6-cylinder engine with an 8-cylinder Cadillac motor.  He needed a newer panel for mounting the tach and other gauges.  This is the result.  Panel is 17.5x8.5x.125", with the center hole being 3-5/8 diameter.

(http://www.pbase.com/kvom/image/132257285/large.jpg)

The holes were milled CNC using this setup:

(http://www.pbase.com/kvom/image/132188130/large.jpg)

Title: Re: Instrument Cluster
Post by: kvom on February 02, 2011, 10:17:52 PM

CamBam for CAM, mach3 for control