MadModder

Gallery, Projects and General => Member Videos => Topic started by: Jim Dobson on October 25, 2022, 01:54:09 AM

Title: Baker Fan demonstrations and information for Steam, Stirling or Hit & Miss Engin
Post by: Jim Dobson on October 25, 2022, 01:54:09 AM

Baker Fan demonstrations and information for Steam, Stirling or Hit & Miss Engines - Put a load on!

Since making these Baker Fans and running them off an assortment of engines I have been asked many times for build hints, dimensions and advice so hopefully I have covered it all and given some demonstrations with the video shorts of just how a Baker Fan gives you a whole other dimension when running your engines under this simple device that puts them under a working load.

Title: Re: Baker Fan demonstrations and information for Steam, Stirling or Hit & Miss Engin
Post by: vtsteam on October 25, 2022, 01:13:16 PM

I particularly liked the sound of the PM Research #3 engine. Also have a soft spot for horizontal mill engines in general.

Title: Re: Baker Fan demonstrations and information for Steam, Stirling or Hit & Miss Engin
Post by: Jim Dobson on October 25, 2022, 05:43:15 PM

Quote from: vtsteam on October 25, 2022, 01:13:16 PM

I particularly liked the sound of the PM Research #3 engine. Also have a soft spot for horizontal mill engines in general.

Thanks Steve, makes such a difference hearing these small engines under a load.