MadModder

The Shop => Tools => Topic started by: DavidA on May 17, 2015, 04:54:50 PM

Title: X1L
Post by: DavidA on May 17, 2015, 04:54:50 PM

Should the top (motor + casing) be solid or should it move slightly  relative to the quill ?

Dave. :scratch:

Title: Re: X1L
Post by: chipenter on May 18, 2015, 02:02:34 AM

The casing should be clamped to the quill by two 6mm cap head screws under the casing , but the quill can move if not adjusted by the 8mm cap head in front of the handle that clamps the split together on the front , adjust untill the head rises smoothly against the spring .