MadModder
Gallery, Projects and General => Gallery => Topic started by: ukazak on August 25, 2014, 09:36:21 AM
-
Hi, Here is my recently completed 50% up scaled Mill engine, which I really had fun building. :D
(http://i1312.photobucket.com/albums/t521/ukazak/MILL%20ENGINE/MillEmgine-7_zps0177640c.jpg) (http://s1312.photobucket.com/user/ukazak/media/MILL%20ENGINE/MillEmgine-7_zps0177640c.jpg.html)
-
Nice looking machine. You have been busy in your shop, posting up three machines you are finished with. I'm impressed.
-
Very nice!
-
Thanks for comments, i was away for a while, had nothing to share or so. I have three more machines completed but not yet posted. I will post them shortly.
-
nice engine and good work
-
Inspirational, congratulations ukazak :clap:
-
Hi ukazak, did you make this engine from solid metal, or was it made using castings? It looks well.
Cheers David
-
Thanks, all solid materials. No castings anywhere at all.
-
Very nice! How large is it, ukazak? :thumbup: :clap:
-
Very nice! How large is it, ukazak? :thumbup: :clap:
it is 50% up scaled from the original plans.
-
Original plans? And they show an engine that is....?
I just want an idea of what I'm looking at.
Is it bigger than a breadbox? :)
-
Original plans? And they show an engine that is....?
I just want an idea of what I'm looking at.
sorry, it is Elmer's #33.
Is it bigger than a breadbox? :)
-
Ahhh, clues! :thumbup:
Elmer's #33 X 150%
Will have it figured out shortly.......... :coffee:
-
It's about 11" long and 4-1/2" wide, with a bore of 3/4" and stroke of 1-1/2". A nice solid size! :beer: