MadModder
Home Base => Introductions => Topic started by: Will_D on August 17, 2014, 02:35:01 PM
-
Hi Guys,
Just renewing some ME interests.
I am a homebrwer with a workshop so guess what I get:
"Hi Will, Could you 'JUST' drill this out to 13 mm (in 316 Stainless), Oh and by the way I have already hardened it for you by burning out some 6mm drills"
I used to live in Ashton-u-Lyne (NE Manchester in UK) and was fairly inviolved with Rochdale MES
Now living in Dublin, Ireland (For 23 years)
So if any one from RMES is here I would love to hear from you
Found out about you from John Mills the Twastard aka DoubleBoost.
Love the videos John
-
Hi Will :wave: Welcome to Madmodder :mmr:
Nice to have another member from Ireland, I'm a few miles north of you (about 85)
Tim
-
Hi
Will
Great to see you here :D :D :D
John
-
Thanks to John and Spuddevans for the welcome.
I joinded another Model Enngineering forum, Introcuded myself in the intros and asked a question!
The silenence was deafening!
So looking foreward to a some good chats!
@Spuddevanns: Any intersest in home brewing?
www.nationalhomebrewclub.com (http://www.nationalhomebrewclub.com)
-
Hi Will, welcome! :wave:
re. questions -- ask away!
-
@Spuddevanns: Any intersest in home brewing?
www.nationalhomebrewclub.com (http://www.nationalhomebrewclub.com)
Sadly (or happily, depending on your view) I have absolutely no taste for any alcohol at all, it all tastes the same to me :loco: I know, an Irishman who doesn't drink :lol:
Tim
-
Hi Will, and welcome!
-
Hi Will welcome to the forum, what are your ME interests, it would be great to know?
Cheers David
-
Hmmm, Where to start?
Have been chewing metal since 1974. First lathe was a round bed Drumond that me girlfiend bought me and was installed in her kitchen!. A year later while working for Avros's in Chadderton a mate of a mate sourced me a ML7 on the industrial stand ( was probably nicked from department 101 (updatirs at the back of the tool room)
Was a member of Rochdal MEES for a long time ( till I moved to Dubland)
I have a 3 1/2" Rob Roy Chassis that runs on air thats about 35 years old! Boiler is half built!
The Myford/Drill/Centec 2 Horizontal Mill gets used now and again but since getting involved in the homebrew scene I have sort of been suckeked into to stainless metal working.
As in "can you machine this/bore this out/make one of these" sort of questions!
Biggest mistake was to upgrage to a tig welder! :doh:
BTW: I amretired!!
Re. Home brewing:
http://www.nationalhomebrewclub.com/forum (http://www.nationalhomebrewclub.com/forum)
-
Hiya Will
Welcome to the collective :borg:
Eric