MadModder
The Breakroom => The Water Cooler => Topic started by: shipto on August 07, 2021, 10:01:27 AM
-
I am stuck on a project and need a specific bearing but dont know A: if they even exist B: what they would be called if they do.
So they need to be a thrust bearing (and no searching for that isn't bringing up what I need) that will secure onto the end of a pin at about 4-5mm probably by way of a spring type jobby similar to how things like drive shafts are held in place and a free spinning flat face with an outside diameter of about 12-15mm.
Any ideas about what I should type into a search engine would be appreciated.
-
Give Simply Bearings, or Bearing Boys a call, they are both very helpful:
https://simplybearings.co.uk/shop/?gclid=CjwKCAjw3riIBhAwEiwAzD3TiWjiaI9nFhGfCy8sr_mQt2n2Y_uXqqgdH5S_Sg-VUZUMg4DX2bfupRoCSRkQAvD_BwE
https://www.bearingboys.co.uk/?gclid=CjwKCAjw3riIBhAwEiwAzD3TiYyk5PFXqOskYGOK_1qpFs5P-muZ1DcDq4VEe9K3lYfYeBLBJTCohBoCgfAQAvD_BwE
-
Give Simply Bearings, or Bearing Boys a call, they are both very helpful:
https://simplybearings.co.uk/shop/?gclid=CjwKCAjw3riIBhAwEiwAzD3TiWjiaI9nFhGfCy8sr_mQt2n2Y_uXqqgdH5S_Sg-VUZUMg4DX2bfupRoCSRkQAvD_BwE
https://www.bearingboys.co.uk/?gclid=CjwKCAjw3riIBhAwEiwAzD3TiYyk5PFXqOskYGOK_1qpFs5P-muZ1DcDq4VEe9K3lYfYeBLBJTCohBoCgfAQAvD_BwE
I will give them a call when I get the chance on monday but looking through the sites I am not hopeful, I am seriously thinking that what I want doesn't exist to be honest so I may have to rethink my approach.
-
Angular contact bearings my be closer to wat you want , with a face cap .
-
Angular contact bearings my be closer to wat you want , with a face cap .
Yes that looks promising, Thank you. :D