MadModder
The Craftmans Shop => Backyard Ballistics => Topic started by: DaveH on May 18, 2011, 01:44:00 PM
-
Made it for a friend.
(http://www.nam-engineering.com/cm/albums/userpics/10008/normal_DSCN0809.JPG)
(http://www.nam-engineering.com/cm/albums/userpics/10008/normal_DSCN0807.JPG)
DaveH
-
Very nice, :thumbup: have you 'test' fired it?
Chazz
-
Nice and shiny! Does it work?
-
Chazz, Eric,
I will let my mate fire it, I'll just hide and watch :D just in case there are more projectiles than anticipated :doh:
DaveH
-
Nice work, looks great.
Is it simply a long bore with the fuse/ignition hole drilled down into it?
EDIT: ps is that Brassy Babe wobbler engine in your profile pic?
-
craynerd,
Is it simply a long bore with the fuse/ignition hole drilled down into it?
Dead right
The bore is 4.5mm dia x 28mm long (to take a .177 bb ball) the fuse hole is 1.6mm dia.
EDIT: ps is that Brassy Babe wobbler engine in your profile pic?
Thats not my wife in my profile pic - it an ocsillating engine :lol: :lol: :lol:
:beer:
DaveH
-
I haven't forgotten, as soon as I can get everything together, I (or my mate) will fire it. Hopefully a few times.
I'll post a few photos, and if I can get someone to video it, a short video.
The problem is trying to get everyone together at the same time. :poke:
:worthless:
:beer:
DaveH