MadModder
Gallery, Projects and General => Project Logs => Topic started by: krv3000 on September 26, 2013, 06:04:56 PM
-
hi all did not start this job as a project so i did not tack a lot of pics when i got me lathe it needed a repaint and all i had was blue pic 1 well i decided to pant it back to its a original culer witch is a Orange yellow see pic 3 of wat me lathe shod look like any way the blue reacted with the yellow pant that i was gowning to pant it with not a big problem as i only tried a bit on the tale stock so i had a go with the gray that i panted me grinder with this to lifted the blue :yikes::yikes: that's when the fun started i striped the lathe right back but left the head on then with sum pant thinners removed all the pant on the lathe SOS no pics of that bit i then got sum zinc filer primer and after masking off the bead and head stock repainted the base and the rest of the lathe this pant had to be left for 8 hawers before panting on the top i left it for a full day then hand panted it gray and did the tale post and the crosslide and compound slide in red i had just finish putting it back together when a Friend pop ed in can i turn a Peace of ally for him well pic speak for them selves right pics
-
By god I am glad you did not stick with that Yellow / orange vomit colour Bob :palm: The final colours look the best I think and after seeing the lathe in person the other night I dont think the photos do it justice really as it looked even better in the flesh.
Good move shifting the sign too Bob as you will look bad if something hits you without a guard with the sign that big directly above the lathe :lol:
Cheers Mick
-
I had a look at the lathe last nite
The pictures don't do Bobs work justice
It looked like a new one but a "proper colour"
Bob also gave me the little diesel engine he restored
My Dad is a collector of such things
Bob you made a old man very happy
John
-
Looks great Bob, and particularly with fresh aluminum swarf on it, too! :thumbup: :clap: