MadModder

Home Base => Introductions => Topic started by: rythmnbls on August 21, 2011, 03:07:29 PM

Title: Introduction
Post by: rythmnbls on August 21, 2011, 03:07:29 PM

Hi All,

New member here, I'm originally from Australia but now live in Pennsylvania USA, my main interests are building small gas turbine engines and the electronics to run them.

The shop is pretty basic, a 10x22 grizzly lathe, X2 mill and the usual accessories.

I've been into machining for a few years and found this site via another machining forum ( homeshopmachinist.net ) where I have posted some of my stuff.

Best regards.

Steve.

Title: Re: Introduction
Post by: saw on August 21, 2011, 05:38:51 PM

Hi and welcome to us.
 :worthless:

Title: Re: Introduction
Post by: Brass_Machine on August 21, 2011, 05:39:19 PM

Hiya Steve  :wave:

Welcome to the collective :borg:

I am dying to get rid of my 7x10 and get the 10x22. What part of PA? I am in Central Jersey, not far from Philly.

Eric

Title: Re: Introduction
Post by: DaveH on August 21, 2011, 06:23:35 PM

Steve,

Hello and welcome.
 :beer:
DaveH

Title: Re: Introduction
Post by: spuddevans on August 22, 2011, 01:29:53 AM

Hello Steve :wave: welcome to the cube :borg:


Tim

Title: Re: Introduction
Post by: doubleboost on August 23, 2011, 04:50:37 AM

Hi
Stive
Welcome to mad modders
I have built a few gas turbines (modified turbos)
John

Title: Re: Introduction
Post by: krv3000 on August 23, 2011, 08:12:22 AM

HI enjoy madmodder

Title: Re: Introduction
Post by: rythmnbls on August 23, 2011, 07:38:57 PM

Thanks all for the welcome.

Quote from: Brass_Machine on August 21, 2011, 05:39:19 PM

Hiya Steve  :wave:

Welcome to the collective :borg:

I am dying to get rid of my 7x10 and get the 10x22. What part of PA? I am in Central Jersey, not far from Philly.

Eric

Hi Eric,
I'm in NE PA, about 90 minutes NW of Philly.

Quote from: doubleboost on August 23, 2011, 04:50:37 AM

Hi
Stive
Welcome to mad modders
I have built a few gas turbines (modified turbos)
John

Hi John, nice to meet a fellow enthusiast, I'd love to see some pics.

You can see some of my efforts over at HSM  http://bbs.homeshopmachinist.net/showthread.php?t=44064
(Apologies in advance if linking to other forums is a no-no )

Regards.

Steve.

Title: Re: Introduction
Post by: doubleboost on August 24, 2011, 11:26:03 AM

Hi
Stive
Nice looking gt :clap: :clap: :clap:
Mine are a bit bigger :bugeye: :bugeye: :bugeye:

Regards
John