MadModder

Gallery, Projects and General => Member Videos => Topic started by: celsoari on February 01, 2020, 11:01:49 AM

Title: foundry work - aluminum pulley
Post by: celsoari on February 01, 2020, 11:01:49 AM

Step by step how I build an aluminum pulley

Greetings from Brazil


Celso Ari

Title: Re: foundry work - aluminum pulley
Post by: tom osselton on February 01, 2020, 07:16:28 PM

 :thumbup:

Title: Re: foundry work - aluminum pulley
Post by: SwarfnStuff on February 01, 2020, 11:05:14 PM

Thank you for showing the making of the pulley from rough pattern to finished pulley. Steps were simply shown in minimum of time but I was able to follow your process.
Thanks again,
John B   :thumbup: :med:

Title: Re: foundry work - aluminum pulley
Post by: celsoari on February 02, 2020, 11:10:06 AM

Quote from: SwarfnStuff on February 01, 2020, 11:05:14 PM

Thank you for showing the making of the pulley from rough pattern to finished pulley. Steps were simply shown in minimum of time but I was able to follow your process.
Thanks again,
John B   :thumbup: :med:

Quote from: tom osselton on February 01, 2020, 07:16:28 PM

:thumbup:

thanks Bros,  greetings from Brazil

Title: Re: foundry work - aluminum pulley
Post by: shipto on February 09, 2020, 05:20:16 PM

Very good although I did shudder a little at your bandsaw use  :bugeye:

Title: Re: foundry work - aluminum pulley
Post by: celsoari on February 17, 2020, 03:39:52 PM

Quote from: shipto on February 09, 2020, 05:20:16 PM

Very good although I did shudder a little at your bandsaw use  :bugeye:

Thanks Bro