MadModder

Gallery, Projects and General => How do I?? => Topic started by: sbwhart on August 08, 2010, 05:08:07 PM

Title: Can Any One Help
Post by: sbwhart on August 08, 2010, 05:08:07 PM

At some point I'll be wonting to make a nameplate for my Loco, could any of you guys with a CNC or casting kit (loss wax) help me out with this.

Stew

Title: Re: Can Any One Help
Post by: kvom on August 08, 2010, 05:33:34 PM

I could give it a go.  Do you have a drawing of what you're thinking about?

Title: Re: Can Any One Help
Post by: Gadget on August 08, 2010, 08:00:10 PM

Quote from: kvom on August 08, 2010, 05:33:34 PM

I could give it a go.  Do you have a drawing of what you're thinking about?

I'll be a backup for kvom
Dan

Title: Re: Can Any One Help
Post by: sbwhart on August 09, 2010, 02:02:27 AM

Thanks Guys

I'll do a little research and knock up a CAD drawing.

Stew

Title: Re: Can Any One Help
Post by: lordedmond on August 09, 2010, 03:16:22 AM

not quite the answer you asked for but if you want high quality name plates , head boards ect , or any plate for restored cars try 

http://www.loco-nameplates.com/


Diane is very good had a set done for the class 4 just told her the loco number and she supplied the correct shed plate ,build plates and tender cap plates all done in brass.

Stuart