MadModder

Home Base => Introductions => Topic started by: tonybraz on February 02, 2011, 12:40:24 PM

Title: Hello from Herne Bay, Kent.
Post by: tonybraz on February 02, 2011, 12:40:24 PM

I been reading the site for a few weeks and decided to join. I race cars full size (750 Formula) and model cars (not as fast as the kids).Workshop at the bottom of the garden has a Weiler LZ280,Tom Senior mill and a small cnc mill.

Tony

Title: Re: Hello from Herne Bay, Kent.
Post by: j45on on February 02, 2011, 01:43:33 PM

Hi Tony  :wave:

Title: Re: Hello from Herne Bay, Kent.
Post by: Brass_Machine on February 02, 2011, 02:01:39 PM

Hiya Tony  :wave:

Welcome to the collective :borg:

Show us pictures of the race cars!

Eric

Title: Re: Hello from Herne Bay, Kent.
Post by: krv3000 on February 02, 2011, 05:45:54 PM

HI jump in and have fun    :nrocks:

Title: Re: Hello from Herne Bay, Kent.
Post by: saw on February 02, 2011, 06:22:42 PM

Welcome Tony  :wave:

Title: Re: Hello from Herne Bay, Kent.
Post by: tonybraz on February 04, 2011, 05:27:30 PM

 
   hear is a picture of my workshop, a little hard to zoom the camera to get a good picture will try another camera

   Tony

Title: Re: Hello from Herne Bay, Kent.
Post by: Ray on February 04, 2011, 08:46:41 PM

Welcome Tony. 
Ray

Title: Re: Hello from Herne Bay, Kent.
Post by: tonybraz on February 05, 2011, 04:48:33 PM

  A few more pictures of the mill, the is a compucutters design. I run it on Mach3 and am thinking of buying Cambam. The spindle motor is a brushless motor 800kv running on 15 volts and this has enough power to run a 6mm cutter with stallling.

  Tony