MadModder
Home Base => Introductions => Topic started by: Bolster on November 12, 2010, 10:46:28 AM
-
Greetings, all. Bolster from Mexifornia...that's the southern part of California that you can't distinguish from Mexico. Only recently found your site. I have a decent wood shop, but metal machines are limited to (1) Sieg X3 mill (for which I have published an extensive tram/rebuild posting elsewhere; if interested let me know); and (2) a Coote belt grinder. Am looking forward to adding a lathe in a year or so.
Lifting the beastie into place...
(http://www.cmp-usa.com/interest/x3d-3376%20lift.jpg)
-
Hiya :wave:
Welcome to the collective :borg:
OK, lets see the X3 stuff :)
Eric
-
Right. It's a multiple pages posting on getting a Sieg X3 up and running. Agonizing at times. Is it allowed to post a link to another forum?
http://www.chaski.org/homemachinist/viewtopic.php?f=43&t=83378
-
Right. It's a multiple pages posting on getting a Sieg X3 up and running. Agonizing at times. Is it allowed to post a link to another forum?
http://www.chaski.org/homemachinist/viewtopic.php?f=43&t=83378
Sure. Links are OK.