MadModder

Gallery, Projects and General => Project Logs => Topic started by: doubleboost on April 07, 2013, 04:09:25 PM

Title: ER 32 COLLET HOLDER VIDEO PART 4 (re edit)
Post by: doubleboost on April 07, 2013, 04:09:25 PM

Hi
Lads
I edited out the bad practice bits

John

Title: Re: ER 32 COLLET HOLDER VIDEO PART 4 (re edit)
Post by: micktoon on April 07, 2013, 06:06:59 PM

  Hi John , aye you done the right thing  :thumbup: , anyone with all ten fingers at your age must be using good judgement but then again the man with nine fingers probably thought that a second before he went down to nine  :palm:, so, 'better safe than sorry' is the way to go.

 Another top class video , I am looking forward to the next episode

  Cheers Mick

Title: Re: ER 32 COLLET HOLDER VIDEO PART 4 (re edit)
Post by: vtsteam on April 07, 2013, 09:18:02 PM

Me, too. Want to see that collet holder in action!

I don't have ER32 collets, but do have a full set of R8s for my mill, and a bunch of C5s for my collet spinner. Wonder if I could do a chuck to fit the Sears 12" x 36 lathe for the R8s?

Title: Re: ER 32 COLLET HOLDER VIDEO PART 4 (re edit)
Post by: Mayhem on April 08, 2013, 01:59:07 AM

Quote from: vtsteam on April 07, 2013, 09:18:02 PM

...Wonder if I could do a chuck to fit the Sears 12" x 36 lathe for the R8s?

Of course you can.  Plan it out, grab a chunk of steel and go for it.

Title: Re: ER 32 COLLET HOLDER VIDEO PART 4 (re edit)
Post by: BillTodd on April 08, 2013, 07:27:56 AM

 John  -  Respect  :bow:

Title: Re: ER 32 COLLET HOLDER VIDEO PART 4 (re edit)
Post by: Fredbare on April 10, 2013, 06:09:33 PM

Great vodeo again John, many thanks, looking forward to the next installment.

John

Title: Re: ER 32 COLLET HOLDER VIDEO PART 4 (re edit)
Post by: markball2 on April 20, 2013, 11:36:26 PM

Just watched all 5 videos.  Impressive to say the least.

I always wondered how to cut a taper on the lathe without a taper attachment.  Now I know.  Thank you for that.  Learned something new tonight.