MadModder
Home Base => Introductions => Topic started by: fatfranky on March 15, 2010, 08:24:33 AM
-
Hi
I've just joined this forum after reading some of the very informative posts, and How To's.
I'm not that much in to machining, I currently have a Boxford AUD and am looking for a Milling machine and would appreciate any advice.
Main interest tends to be cars (mostly old VW's) I was originally a Coachbuilder by trade so a lot of my experience is sheet metal/welding/fabrication.
Best Regards
Frank
-
Hi there Frank :wave: welcome to madmodders. Dont worry that you're not much into machining ( yet :lol: ), madmodder is a "Projects" forum, I'm sure whatever you are into you will find others on here who are interested in too, and the rest of us will be
nosy interested to see as well :thumbup:
The only thing we ask is that you show us what you are doing, cos :worthless: :lol:
Tim
-
Welcome to the collective Frank. :borg:
I've owned VW's since 1971. Even built a dunebuggy in my younger days. :ddb:
Bernd
-
Welcome aboard Frank. You are in the right place. Ray
-
Hi there Frank!
Welcome to the collective :borg:
Tim has it right, we are not just a machining board... but a projects board. Almost everything and anything is welcome!
Eric
-
Frank
Welcome to MadModders Frank. I can only agree with what the others have said. If you have any questions, ask away as there is always someone around to answer or at least give an opinion. :lol: :lol: We look forward to viewing your projects in the future. :D :D
Cheers :beer:
Don