MadModder
The Shop => Our Shop => Topic started by: DAVYBFAST on August 01, 2010, 04:50:09 PM
-
hi all iam new here so i dont even know if you s can help
i have a cnc mill and lathe that came out off a school but i dont have the lathe software,
would any one have a copy or know were to buy a copy or does any other software work with this type off lathe
go on put your heads togather and help lost soul
-
Welcome to the collective! :)
I think a little more information is going to be needed, such as the brand/model of the equipment, etc.
-
They were made over a quite long period given computers were expanding fast.
the early ones used a BBC computer and ran of 7" floppies in a double drive system.
Later ones ran of PC's.
Somewhere I have copies of the lathe and mill programs for the PC version and the manuals but it may take me a while to find them.
John S.
-
Hi Davey,
Welcome to the Collective! :borg:
All manner of problems are often solved on here...... But we do need a little more information than you've given so far! ::)
Above all, we like pics and descriptions.
Give us a few more clues, lets see what can be done! :thumbup:
David D
-
:worthless: :D I love pics did I tell everyone I love pics
-
Gawd John, it's not THAT long since I sold you the software with the lathe and mill - are you still storing floppies on the floor with the swarf???? :wave: Sam