MadModder
The Shop => Tools => Topic started by: ageofaquarius21 on July 12, 2010, 03:49:51 PM
-
Greetings, anyone have information on the back gearing arrangement for the above mini-lathe? My thanks, Quincy Collins, Nova Scotia, Canada
-
Hi Quincy,
I've got a Perris like this:
http://www.lathes.co.uk/perris/ . Would details of its back gearing assist?
I think the present-day Cowells (they took over the lathe after Mr Perris died) 90ME has very similar arrangements.
Andy
-
H, any end shot showing the gears and their bearings, etc. would be of interest! thanks, Quincy
-
Hi Quincy,
I'll send you a PM with some photos. I also have the original construction notes for my Perris SL90, and I put a PDF of them in the Files section of the Cowells 90 Group:
http://groups.yahoo.com/group/cowells_90/
The back gears are dealt with on pages 20/21/22 of the PDF (not the numbers appearing at the bottom of the scanned pages). You need to join the group before you can get into its Files section.
Andy