MadModder

The Shop => Metal Stuff => Topic started by: PekkaNF on March 22, 2022, 04:42:13 PM

Title: Brown stuff as a jig.
Post by: PekkaNF on March 22, 2022, 04:42:13 PM
Mentioned on other thread that I use sometimes wood in metalworking. Here I had thin walled pipe that would have been awkward to hold on another way. As you see wood is pretty elastic and I produced scalloped edge with end mill....should have been feeding a bit slower.

Not finest work but will do on this
Title: Re: Brown stuff as a jig.
Post by: vtsteam on March 22, 2022, 08:33:57 PM
Great work, Pekka!  :clap:  :thumbup:
Title: Re: Brown stuff as a jig.
Post by: Brass_Machine on March 25, 2022, 11:14:33 AM
Thats pretty cool!
Title: Re: Brown stuff as a jig.
Post by: PekkaNF on March 25, 2022, 01:31:27 PM
Thank you guys!
Title: Re: Brown stuff as a jig.
Post by: vtsteam on March 25, 2022, 04:59:35 PM
Pekka, what are the parts for?  :beer:
Title: Re: Brown stuff as a jig.
Post by: PekkaNF on March 25, 2022, 06:57:33 PM
Spirit levels for sort of king way alignment tool.

I have vials. I got today spherical washers to allow tilt the vial tubes for adjustment, but looks like I need "plan B" to execute it.
Title: Re: Brown stuff as a jig.
Post by: vtsteam on March 25, 2022, 08:37:08 PM
 :proj:
Title: Re: Brown stuff as a jig.
Post by: RotarySMP on March 29, 2022, 09:26:16 AM
Cool work holding solution, and a very cool project. Nice one.