MadModder

Gallery, Projects and General => Gallery => Topic started by: swhite on June 09, 2010, 01:01:40 PM

Title: SR9 power bus
Post by: swhite on June 09, 2010, 01:01:40 PM

I made a power bus for Harley's or any other low voltage machine, I have it in patent pending mode right now, the purpose of the device is to give the user a place to pick up voltage to run all of there extra equipment on the bike, it keeps them from having to remove everything above the battery to connect to it. I named it the SR9..

Title: Re: SR9 power bus
Post by: Brass_Machine on June 09, 2010, 04:09:07 PM

Very nice Steve. Little things like that can make a huge difference in the riding experience.

Eric

Title: Re: SR9 power bus
Post by: swhite on June 09, 2010, 05:04:16 PM

Thanks Eric,
I have a good friend that some very expensive Harleys and his need to add heated gear, GPS and a few other accessories inspired me to come up with that device, it is made out of ABS and the bus bars inside are made in aluminum with 10-32 NF socket head screws to hold the wires in place.