MadModder

Gallery, Projects and General => Member Videos => Topic started by: Jim Dobson on May 19, 2021, 09:35:18 PM

Title: DIY Steam Trip Hammer powered by Jensen 20G Steam
Post by: Jim Dobson on May 19, 2021, 09:35:18 PM

DIY Steam Trip Hammer powered by Jensen 20G Steam

This is a DIY homemade Steam Trip Hammer powered by a Jensen 20G Steam Engine the green belting I'm using is a larger 3mm thickness which is a thicker than normal belting for some added grip.

Title: Re: DIY Steam Trip Hammer powered by Jensen 20G Steam
Post by: efrench on May 20, 2021, 12:35:51 PM

Very nice.  If you use V (or trapezoid) pulleys, you'll get more grip.  Misumi has a good explanation: https://us.misumi-ec.com/vona2/detail/110300416620/?curSearch=%7b%22field%22%3a%22%40search%22%2c%22seriesCode%22%3a%22110300416620%22%2c%22innerCode%22%3a%22%22%2c%22sort%22%3a1%2c%22specSortFlag%22%3a0%2c%22allSpecFlag%22%3a0%2c%22page%22%3a1%2c%22pageSize%22%3a%2260%22%7d&Tab=wysiwyg_area_3

Title: Re: DIY Steam Trip Hammer powered by Jensen 20G Steam
Post by: Jim Dobson on May 20, 2021, 08:10:51 PM

Quote from: efrench on May 20, 2021, 12:35:51 PM

Very nice.  If you use V (or trapezoid) pulleys, you'll get more grip.  Misumi has a good explanation: https://us.misumi-ec.com/vona2/detail/110300416620/?curSearch=%7b%22field%22%3a%22%40search%22%2c%22seriesCode%22%3a%22110300416620%22%2c%22innerCode%22%3a%22%22%2c%22sort%22%3a1%2c%22specSortFlag%22%3a0%2c%22allSpecFlag%22%3a0%2c%22page%22%3a1%2c%22pageSize%22%3a%2260%22%7d&Tab=wysiwyg_area_3

Thanks for the link  :thumbup: