MadModder
Gallery, Projects and General => Gallery => Topic started by: sbwhart on April 25, 2018, 08:24:20 AM
-
Take one beat up old pressure gauge
(http://i.imgur.com/6zTI0K2l.jpg) (https://imgur.com/6zTI0K2)
One cheap electric clock movement
(http://i.imgur.com/vL36GcWl.jpg) (https://imgur.com/vL36GcW)
Cut the guts out of the gauge.
(http://i.imgur.com/MnJ39uTl.jpg) (https://imgur.com/MnJ39uT)
Marry the two together and hey presto you have a pressure gauge clock
(http://i.imgur.com/qQ2PYWfl.jpg) (https://imgur.com/qQ2PYWf)
:nrocks:
Stew
-
Nice, will take some getting used to 30 past 150psi. I do hope 300psi is clocking off time.
-
So what timezone are you in Stew? GMT, BST or PSI? :lol:
-
I’ve been telling you for years to get making a clock but I wasn’t expecting you to use a quartz movement :Doh:
Haha, nice build Stu. Pretty neat idea.
-
hi a job well dune where one leads many will follow
-
Hi
Built this one a few years back Using a Japanese ""Seiko" movement and scrap unloader valve from a Broomwade Compressor.
No Pressure from time with a built in unloader.
-
One I made maybe 25 years ago
-
How do you know when it's officially Beer:30?
Don
-
Any time after 300psi a pint of Safety Valve should be consumed. Keep consuming till pressure reduces or two gauges are observed.
-
...Keep consuming till pressure reduces...
Pressure reduction valves should only be operated in the designated area. Now wash your hands :D
-
That will allow a few extra pints before reaching the designated area.